Resin – Complete Water Solutions

General Technologies – Anion Resin – PFOS-891DQ (CL)

Tina — Tue, 27 Oct 2020 13:11:14 +0000

PRODUCT APPLICAIONS
Polyfluoroalkyl substances, known as PFAS, are man-made chemicals found in everyday items such as non-stick, fast-food wrappers, stain-resistant fabrics, non-stick cookware, firefighting foams, and the manufacturing of certain papers.
PFOS-891DQ is a product designed with high selectivity for perfluoroalkyl substances. The product with various degrees of porosity provides dual removal mechanisms by both ion exchange and adsorption and deliveries excellent high operating capacity and kinetics.
Through the treatment operation the resin will effectively remove both the long and short chain PFAS such as PFOA, PFOS.

CHEMICAL AND THERMAL STABILITY
PFOS-D891DQ resin is insoluble in dilute or moderately concentrated acids, alkalies, and in all common solvents. However, exposure to significant amounts of free chlorine, “hypochlorite” ions, or other strong oxidizing agents over long periods of time will eventually break down the crosslinking.
This will tend to increase the moisture retention of the resin, decreasing its mechanical strength, as well as generating small amounts of extractable breakdown products. It is thermally stable to higher than 75 C (170 F) in the chloride form.

ResinTech – Specialty Resins – SIR-1300

Tina — Tue, 20 Oct 2020 19:11:26 +0000

ResinTech SIR-1300 is a hybrid ion exchange resin media with catalytic properties to remove dissolved iron, manganese and hydrogen sulfide from potable and non-potable water. SIR-1300 oxidizes dissolved ferrous iron (FE²⁺) to insoluble ferric iron (FE³⁺). Similarly soluble Mn²⁺ will be converted to insoluble Mn³⁺. H₂S is reduced to yellow sulfur particulate. A secondary mechanism of SIR-1300 is Arsenic Reduction. As Iron is loaded onto the bed, Arsenic is co-precipitated as ferric arsenate. The resulting insoluble Iron, Mn, sulfur and arsenate particulates are effectively removed via filtration. The accumulated particulates can be removed with simple backwash and air scour.

ResinTech – Specialty Resins – SIR-1200

Tina — Tue, 20 Oct 2020 19:08:46 +0000

ResinTech SIR-1200 is a chloride form type 1 gel strong base anion resin. SIR-1200 is intended for use in uranium removal as well as removal of other trace contaminants such as chromate and arsenate. SIR-1200 is supplied in the chloride form.

ResinTech – Specialty Resins – SIR-900

Tina — Tue, 20 Oct 2020 19:03:45 +0000

ResinTech SIR-900 is a granular aluminum oxide based adsorbent. SIR-900 is supplied as an active oxide media based on porous aluminum oxide. SIR-900 is intended for removal of fluoride from water. It can also be used for the removal of arsenate, selenate, and lead from potable water. SIR-900 is supplied in the activated adsorbent form.

ResinTech – Specialty Resins – SIR-800

Tina — Tue, 20 Oct 2020 19:01:36 +0000

ResinTech SIR-800 is a sulfite form strong base gel anion resin. SIR-800 removes oxygen from water by converting sulfite to sulfate on the resin exchange sites. SIR-800 is intended for oxygen removal applications and for other processes where an immobile reducing agent is needed. SIR-800 is supplied in the neutral sulfite form.

ResinTech – Specialty Resins – SIR-700-HP

Tina — Tue, 20 Oct 2020 18:59:17 +0000

ResinTech SIR-700-HP is a granular gel weak base anion resin with unique epoxy polyamine functionality. It utilizes a secondary mechanism for chromate removal that causes chromium to precipitate inside the resin matrix when the feed pH is slightly acidic. SIR-700-HP is intended for all chromate removal applications. SIR-700-HP is shipped in the acid chloride form and can be special ordered in the acid sulfate form (when ordered as SIR-700-SO4).

ResinTech – Specialty Resins – SIR-600

Tina — Tue, 20 Oct 2020 18:57:16 +0000

ResinTech SIR-600 is a sodium/potassium form granular aluminosilicate zeolite. SIR-600 is an inorganic cation exchanger that can also capture certain ions by molecular sieving. SIR-600 is particularly selective for cesium, potassium, and ammonium. SIR-600 is intended for removal of radioactive cesium from waste waters that contain moderate levels of sodium and potassium, and for removal of ammonia from water. SIR-600 is supplied in the mixed sodium/potassium form.

ResinTech – Specialty Resins – SIR-500

Tina — Tue, 20 Oct 2020 18:55:13 +0000

ResinTech SIR-500 is a sodium form macroporous chelating weak acid cation resin. SIR-500 has unique aminophosphonic chelating functionality and is particularly selective for alkaline earth metals such as calcium. SIR-500 is intended for removal of hardness from saturated brine and for removal of divalent metals such as copper and nickel from wastewater and various process streams. SIR-500 is supplied in the sodium form, can be special ordered in the hydrogen form (as SIR-500-H), or in the buffered form (as SIR-500 pH ADJ).

ResinTech – Specialty Resins – SIR-200

Tina — Tue, 20 Oct 2020 18:44:58 +0000

ResinTech SIR-200 is a hydrogen form macroporous mercury selective weakly acidic cation resin. SIR-200 has unique functionality that makes it selective for mercury and other heavy metals. SIR-200 is also very selective for noble metals when present as cations. SIR-200 is intended for mercury removal and for removal/recovery of various precious metals. SIR-200 is supplied in the hydrogen form.

ResinTech – Specialty Resins – SIR-400

Tina — Tue, 20 Oct 2020 18:44:50 +0000

ResinTech SIR-400 is a free base form macroporous heavy metal selective weakly basic anion resin. SIR-400 has unique thiouronium functionality and is able to remove mercury and other heavy metals to very low levels (when present as divalent cations). SIR-400 is also quite selective for noble metal cations. SIR-400 is intended for mercury removal and for removal/recovery of various precious metals, when present in cationic form. SIR-400 is supplied in the free base form.

ResinTech – Specialty Resins – SIR-1000

Tina — Tue, 20 Oct 2020 18:43:12 +0000

ResinTech SIR-1000 is a macroporous chelating weak base anion resin. SIR-1000 is functionalized with Picolylamine which allows the resin to maintain its chelating strength even in significantly acidic solutions. SIR-1000 is intended for use in process baths and rinse waters in metal finishing applications. It is especially well suited for use in highly acidic trichrome plating baths. SIR-1000 is supplied in the acid sulfate form.

ResinTech – Specialty Resins – SIR-300

Tina — Tue, 20 Oct 2020 18:38:30 +0000

ResinTech SIR-300 is a sodium form macroporous chelating weak acid cation resin. SIR-300 has unique chelating functionality and is able to remove divalent transition metals preferentially to alkaline earth metals such as calcium. SIR-300 is intended for removal of low to moderate concentrations of heavy metals from waste streams. SIR-300 is supplied in the sodium form, can be special ordered in the hydrogen form (as SIR-300-H), or in the buffered form (as SIR-300 pH ADJ).